# Ignition 8.3 RC1 CL modules

**URL:** <https://forum.cirrus-link.com/t/ignition-8-3-rc1-cl-modules/798>\
**Category:** Ignition Modules\
**Created:** [September 2, 2025, 3:41pm UTC](https://forum.cirrus-link.com/t/ignition-8-3-rc1-cl-modules/798 "2025-09-02T15:41:46Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![gnguyen](https://avatars.discourse-cdn.com/v4/letter/g/41988e/32.png) [@gnguyen](https://forum.cirrus-link.com/u/gnguyen)\
**Post date:** [September 2, 2025, 3:41pm UTC](https://forum.cirrus-link.com/t/ignition-8-3-rc1-cl-modules/798/1 "2025-09-02T15:41:46Z")

</div>

Hi,

Where (or when) can we download the 8.3 RC modules for Ignition? Or at least, where can we download latest beta?

BR,

Gilles

---

<div class="post-metadata">

**Author:** ![dan.potter](https://avatars.discourse-cdn.com/v4/letter/d/6de8d8/32.png) [@dan.potter](https://forum.cirrus-link.com/u/dan.potter)\
**Post date:** [September 2, 2025, 3:55pm UTC](https://forum.cirrus-link.com/t/ignition-8-3-rc1-cl-modules/798/2 "2025-09-02T15:55:04Z")

</div>

Gilles,

You will find them in the link below:

> **[Strategic Partner Modules | Inductive Automation](https://inductiveautomation.com/downloads/third-party-modules/8.3.0-rc1)**
>
> Download and start using the world's most powerful SCADA software in just minutes. Cross-platform, with installers
> available for multiple operating systems.

Dan

---

<div class="post-metadata">

**Author:** ![gnguyen](https://avatars.discourse-cdn.com/v4/letter/g/41988e/32.png) [@gnguyen](https://forum.cirrus-link.com/u/gnguyen)\
**Post date:** [September 2, 2025, 4:25pm UTC](https://forum.cirrus-link.com/t/ignition-8-3-rc1-cl-modules/798/3 "2025-09-02T16:25:36Z")

</div>

thanks. I think 30’ before now, it wasn’t there 😉

---

<div class="post-metadata">

**Author:** ![gnguyen](https://avatars.discourse-cdn.com/v4/letter/g/41988e/32.png) [@gnguyen](https://forum.cirrus-link.com/u/gnguyen)\
**Post date:** [September 2, 2025, 4:41pm UTC](https://forum.cirrus-link.com/t/ignition-8-3-rc1-cl-modules/798/4 "2025-09-02T16:41:35Z")

</div>

Transmission Module 5.0.0-beta2 on Ignition 8.3 RC1 (linux) has the following error: “Error  
Module EULA already accepted.”

Distributor and Engine are installed and OK.

 ![2025-09-02_18-39-18](https://canada1.discourse-cdn.com/flex028/uploads/cirrus_link/original/1X/efb80aa90dc12e83133ecee4359c6785b99209e3.jpeg)

---

<div class="post-metadata">

**Author:** ![gnguyen](https://avatars.discourse-cdn.com/v4/letter/g/41988e/32.png) [@gnguyen](https://forum.cirrus-link.com/u/gnguyen)\
**Post date:** [September 2, 2025, 4:48pm UTC](https://forum.cirrus-link.com/t/ignition-8-3-rc1-cl-modules/798/5 "2025-09-02T16:48:06Z")

</div>

After restarting the gateway once, the following message appeared. After that, I was able to install the module without any issues.

Note that this behavior did not occur with the Engine and Distributor modules, which installed and accepted the EULA without requiring a gateway restart between installations (but after).

 ![2025-09-02_18-43-49](https://canada1.discourse-cdn.com/flex028/uploads/cirrus_link/original/1X/4b1823237af66cc5eee698e3edaab53136414d9e.jpeg)