# ABB Totalflow - Engineering Units

**URL:** <https://forum.cirrus-link.com/t/abb-totalflow-engineering-units/819>\
**Category:** Driver Modules\
**Created:** [November 5, 2025, 10:33pm UTC](https://forum.cirrus-link.com/t/abb-totalflow-engineering-units/819 "2025-11-05T22:33:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![cavementech](https://avatars.discourse-cdn.com/v4/letter/c/dc4da7/32.png) [@cavementech](https://forum.cirrus-link.com/u/cavementech)\
**Post date:** [November 5, 2025, 10:33pm UTC](https://forum.cirrus-link.com/t/abb-totalflow-engineering-units/819/1 "2025-11-05T22:33:32Z")

</div>

Is there a way for Ignition to bring in the Engineering Units from a Totalflow G5?

---

<div class="post-metadata">

**Author:** ![wes.johnson](https://avatars.discourse-cdn.com/v4/letter/w/f14d63/32.png) [@wes.johnson](https://forum.cirrus-link.com/u/wes.johnson)\
**Post date:** [November 7, 2025, 3:23am UTC](https://forum.cirrus-link.com/t/abb-totalflow-engineering-units/819/2 "2025-11-07T03:23:50Z")

</div>

This is not currently supported. It may be possible for us to add this support in the future and we have an issue in our product backlog. But, it isn’t there today.

---

<div class="post-metadata">

**Author:** ![cavementech](https://avatars.discourse-cdn.com/v4/letter/c/dc4da7/32.png) [@cavementech](https://forum.cirrus-link.com/u/cavementech)\
**Post date:** [November 7, 2025, 2:47pm UTC](https://forum.cirrus-link.com/t/abb-totalflow-engineering-units/819/3 "2025-11-07T14:47:48Z")

</div>

Thank you for the response. I know UDT’s can be used but I have several different meter configurations and would require several different UDT’s. The human error is my concern.
